News

JiangSu Juming ChemicalTechnology Co.,Ltd.   BOOTH:NO.B01 TIME :2025.11.27-29 VENUE: Saigon Exhibition and ConventionCenter (SECC) Add: Nguyen Van Linh Parkway, Dist.7 HoChi Minh City Vietnam

JiangSu Juming Chemical Technology Co.,Ltd.   BOOTH:2C148 TIME :2025.11.10-13 VENUE:Crocus-Expo IEC Add: Crocus-Expo IEC, Krasnogorsk,65-66 km Moscow Ring Road ,Russia

JiangSu Juming ChemicalTechnology Co.,Ltd.   BOOTH:H3-3G20 TIME :2025.10.13-15 VENUE: Shanghai World Expo Exhibitionand Convention CenterAdd: No.1099, Guozhan Road, PudongNew Area, Shanghai

JiangSu Juming Chemical Technology Co.,Ltd. BOOTH: E6B68

JiangSu Juming ChemicalTechnology Co.,Ltd.   BOOTH:4P13 TIME :2025.09.17-09.19 VENUE : TOKYO BIG SIGHT East Hall Add:3-11-1 Ariake,Koto-ku,Tokyo, Japan135-0063

JiangSu Juming Chemical Technology Co.,Ltd. BOOTH: 4D17TIME :2025.09.03-09.05VENUE: Bangkok International Trade and Exhibition Center(EH102-104, BITEC, BANGKOK,10260，Thailand )     The 2024 Future CHEM Exhibition will be held from September 11th to 13th, 2024. The exhibition is a professional event focusing on the chemical industry, concentrating on professional industries such as chemicals, dyes, pesticides, pharmaceuticals, water treatment, and chemical equipment technology. The exhibition has received strong support from the Thai government agencies and is a local chemical event with industry characteristics and international standards in Thailand. The strong support from the government will enhance the influence of the exhibition and bring more important trade visitors to it.    In 2025, the exhibition will continue to be held concurrently with the Thailand Lab International Laboratory Exhibition and the Thailand Bio Exhibition in Bangkok, Thailand.

JiangSu Juming ChemicalTechnology Co.,Ltd. BOOTH: 4D17 TIME :2025.09.03-09.05 VENUE: Bangkok International Tradeand Exhibition Center(EH102-104, BITEC, BANGKOK,10260，Thailand )

JiangSu Juming Chemical Technology Co.,Ltd. BOOTH:B2G3-09 TIME :2025.07.29-07.31 VENUE:Jakarta International Expo(JIE B1&B2Hall ), Kemayoran,Jakarta,Indonesia (Jakarta International Expo,PT.JI.H.Benyamin Sueb,Kemayoran JaKarta10620,Indonesia)   The Indonesia Chemical Exhibition has developed into one of thelargest and most professional exhibitions in the region. Specializing in chemicals and clear classification,covering all aspects of the industry, including coatings and surfaces, construction chemistry, cement and concrete, pharmaceuticals, agriculture, cosmetics and pharmaceutical ingredients, householdand care products, oils and fats, especially processing and engineering and mechanical equipment.  

Folic acid (folate,59-30-3) is a kind of B-vitamin which is mainly present in the liver and kidney. The benefits of eating folic acid on the body are softening blood vessels, treating anemia, preventing neural tube malformations, preventing cardiovascular diseases, and improving sperm quality.       1, Soften blood vessels: folic acid is an essential vitamin, can help soften blood vessels, blood homocysteine will stimulate blood vessel wall, causing damage to blood vessels, and folic acid can reduce homocysteine, soften, dilate blood vessels, according to the doctor's advice to eat folic acid can play a softening blood vessel benefits. If there is no deficiency of folic acid, there is no need for additional supplementation, and excessive supplementation may cause gastrointestinal discomfort such as nausea and bloating.   2, Treatment of anemia: folic acid plays an important role in cell division and the synthesis of amino acids and proteins in the body, the lack of folic acid in the body will lead to anemia, white blood cell reduction, usually eat folic acid can treat megagoblastic anemia caused by folic acid deficiency, it is recommended to use under the guidance of a doctor.   3, The prevention of neural tube malformations: pregnant women and pregnant women, breastfeeding women supplementation of folic acid is particularly important, during pregnancy until the first three months of pregnancy began to take folic acid, help prevent fetal neural tube malformations.   4. Prevention of cardiovascular diseases: Folic acid can effectively improve vascular endothelial function and prevent chronic cardiovascular diseases such as coronary atherosclerotic heart disease and hypertension.   5, Improve the quality of sperm: the lack of folic acid in men may lead to a decline in sperm quality, men eat folic acid when preparing for pregnancy to help improve sperm quality, and men can follow the doctor's advice to take folic acid during pregnancy.   Folic acid

Hydroxylamine Hydrochloride, or HAH, is a powerful reducing agent and a key player in various industries. Let's explore its wide-ranging applications. In the pharmaceutical industry, Hydroxylamine hydrochloride is used in the synthesis of antibiotics and other vital drugs.  Its ability to reduce nitro compounds makes it indispensable in creating life-saving medications. In the realm of photography, Hydroxylamine hydrochloride is a crucial component in developing high-quality photographic films.  It helps in stabilizing the silver halide crystals, ensuring sharp and clear images. Hydroxylamine hydrochloride also finds its place in the rubber and plastic industries.  It acts as an antioxidant, extending the lifespan of these materials by preventing degradation caused by heat and light. Additionally, in the field of water treatment, Hydroxylamine hydrochloride is used to remove harmful contaminants, making our water safer and cleaner. From pharmaceuticals to photography, from rubber to water treatment, Hydroxylamine Hydrochloride Powder is a versatile and essential ingredient in modern industry. Discover the power of Hydroxylamine Hydrochloride Powder today.  Contact us to learn more about how this remarkable chemical can enhance your products and processes.

Unlock the potential of your creations with Tryptamine Crystals – the versatile key to innovation in chemistry and beyond! Tryptamine, a naturally occurring compound, is not just any chemical. It's a powerful tool that opens doors to a world of possibilities. Derived from plants and animals, Tryptamine is a fundamental building block in the synthesis of various compounds, including neurotransmitters and pharmaceuticals. In the realm of cosmetics and personal care, Tryptamine Crystals are used to create products that enhance skin health and beauty, thanks to their natural properties. Researchers and scientists around the globe rely on Tryptamine Crystals for their purity and consistency, ensuring reliable and reproducible results in their experiments. Ready to elevate your projects with the power of Tryptamine Crystals? Visit our website today and discover how our high-quality crystals can transform your work. Don't miss out on the opportunity to innovate and inspire!

Today, we’re diving into the versatile and powerful intermediate Trichloroacetic Acid, or TCA. This incredible compound is a game-changer in various industries, from skincare to industrial processes. In skincare, TCA is renowned for its peeling properties. It’s used in chemical peels to rejuvenate the skin, reduce fine lines, and improve overall texture. Dermatologists and estheticians trust TCA for its effectiveness and safety.Trichloroacetic acid (TCA) has a wide range of applications.  Depending on different concentrations, skin preparation conditions, application frequency and the techniques used, it can be used to achieve extremely shallow, shallow and middle layer peeling.  Trichloroacetic acid is most commonly used for exfoliation of the middle layer, especially for the treatment of pigmentation and early facial wrinkles.But intermediateTCA’s applications go beyond beauty. In industrial settings, it’s a key player in the production of herbicides, fungicides, and other agricultural chemicals. Its high reactivity makes it ideal for these demanding applications. In research and development, TCA is a valuable reagent. Scientists use it in organic synthesis and as a precursor for other important compounds. Its versatility and reliability make it an essential tool in the lab.Whether you’re in the beauty industry, agriculture, or scientific research, Trichloroacetic Acid is a must-have. Discover the power and precision of TCA today. Visit our website to learn more intermediate and order your supply now!

Hazardous chemicals trading license

Our factory boron-10 supply is sufficient, have a price advantage. Chemical purchase, real-time quotation, welcome inquiry! 10B isotope Boron is a boron metal suitable for applications in neutron detection technologies.We focus on manufacturing optimized materials with an emphasis on stable boron isotopes. In addition, we offer a proven supply chain, consistent product quality and the ability to custom engineer products for your unique applications.Our experts can help you solve materials related problems in the demanding nuclear industry! Boron-10 used for commercial isotope enrichment. The boron we supply, its crystal structure improves processability, reduces dust, reduces problems, and is cleaner overall.

Photoinitiator TPO manufacturers believe that photoinitiator, also known as photosensitizer or photocuring agent, is a kind of ultraviolet (250 ~ 420 nm) or visible (400 ~ 800 nm) region to absorb a certain wavelength of energy, and produce free radicals, cations and other compounds. Thus, monomer polymerization, cross-linking and curing are initiated. Photoinitiator TPO manufacturers believe that photoinitiator is the key component of the photocuring system, related to the formula system under the light, oligomer and thinner can quickly change from liquid to solid, that is, crosslinking curing. Its basic functional characteristics are: the initiator molecule has a certain light absorption capacity in the ultraviolet (200 ~ 400 nm) or visible (400 ~ 800 nm) region. After direct or indirect absorption of light energy, the initiator molecule jumps from the ground state to the active excited state, resulting in an active fragment that can initiate monomer polymerization. These fragments can be free radicals, cations, anions or ionic radicals. Photoinitiator TPO manufacturers believe that according to the different active fragments produced, photoinitiator can be divided into free radical polymerization photoinitiator and cationic polymerization photoinitiator, among which free radical polymerization photoinitiator is widely used, followed by cationic photoinitiator. Anionic photoinitiators are rarely studied and no commercial application has been reported so far. Photoinitiator TPO manufacturers believe that in many practical photocuring systems, the formation of active fragments involves chemical interactions between the photoinitiator and other auxiliary components to promote the formation of active fragments and improve the initiation efficiency. These auxiliary components may be referred to as coinitiators sensitizers or photosensitizers depending on their specific functions. Initiator is an important part of the bimolecular photoinitiation system. If it is consumed by chemical reactions in the photoinitiation process, it is often called sensitizer. Photosensitizers can also act with photoinitiators to promote photopolymerization, but only the physical interaction of energy transfer occurs between them. The action principle is that the photosensitizer molecule absorbs light energy of large wavelength and transitions to an excited state. Energy is transferred from the excited photosensitizer molecule to the initiator molecule through intermolecular physics. In this way, initiator molecules that cannot absorb long-wave light energy indirectly transition from the ground state to the excited state, resulting in fragments with polymerization initiation activity. This process is also known as photosensitization. In the whole process, the photosensitizer is not consumed, just as a carrier of energy in the system repeatedly run. Photoinitiator TPO manufacturers believe that the more the absorption peak of photoinitiator overlaps with the main emission band of the light source, the higher the effective radiation enhancement degree of photoinitiator, and the better the effect of improving the curing speed of ink. The peak value of UV-LED is narrow and the radiation energy is concentrated in the narrow UV spectrum, so UV curing can only be concentrated in the narrow UV spectrum range. At present, the wavelengths of UV-LED curing light sources are mainly 365nm, 375nm, 385nm, 395nm and 405nm, and the emission bandwidth of each wavelength light source is about 10nm. However, most of the photoinitiators in the market have strong absorption at 300-370nm, but the optical absorption performance is poor in the range of more than 370nm, resulting in the emission spectrum of the light source in the UV-LED curing system and the traditional photoinitiator is different.

The water treatment industry is at the forefront of efforts to protect the water circulation around people and reduce or treat polluted water. At the same time, the competition in the water treatment pharmaceutical market is very big, water treatment in now is not only to become a variety of water treatment equipment introduced to use, but also plays a great role in water treatment pharmaceutical, water treatment pharmaceutical is now necessary in the future of sewage treatment, the prospect is very optimistic. Water treatment agents are specifically used in sewage clarification treatment, we all know that the treatment of water quality has many processes, so the classification of water treatment agents is very broad, including organic water treatment and inorganic water treatment agents, dedicated to scale removal agents. These different agents play a very important role in water treatment, can be said to be the most important part of water treatment. Water treatment agent is not only sewage flocculant precipitation effect is significant, in the treatment of sludge dewatering is also very good, and for industrial wastewater treatment, is also very effective. Industry will inevitably produce some polluted waste water, and water treatment agents can be treated these waste water, so that the sewage can also be purified, reused, save water resources, protect the water environment. Haonuo WATER treatment Pharmaceutical manufacturer is willing to work with environmental activists to maintain the clean water resources of human beings.

1. Photoinitiator and amine promoter EDAB are used together. 2, small smell, no poison, no environmental pollution. 3, cheap and easy to obtain, low cost. 4. Select photoinitiator with appropriate activity according to the type of prepolymer and monomer. 5, with good solubility and reactivity, less dosage, high initiation efficiency. 6, there should be a certain thermal stability, not decomposed below 85℃, there should be a long time storage stability. 7, it is best to use several photoinitiator compound, in different wavelength range can lead to curing, curing faster than a single photoinitiator. The above content is an overview of photoinitiator, action mechanism, performance requirements, common types, characteristics and principles of use. Photoinitiator is one of the indispensable components of the free radical UV photocuring reaction system. The type and dosage of photoinitiator have great influence on the photocuring behavior of the system, and play a decisive role in the sensitivity of the photocuring system.

There are many kinds of landscape water treatment technologies mainly divided into physical, chemical and microbial treatment technologies. Physical technology such as water change: you can dilute the concentration of impurities in the water by diverting water and changing water, so as to reduce the concentration of impurities. However, a large amount of clean water needs to be replaced, which is bound to reduce the waste of precious water resources in today's rather scarce water resources. Chemical methods (adding the algae fungicidal) water in the sun, can make the algae blooms in the water, be full of the whole surface, not only affects the water body and beautiful, and blocked off the sun, leaving many underwater preventing plant photosynthesis, release oxygen, the chemical changes of the pollutants in water, causing water quality deterioration, giving off a terrible stench, The water also turned black. So you add a chemical algaecide to kill the algae. As time goes by, drug-resistant algae will appear in the water, and the efficacy of algal exterminator will gradually decline. The interval of administration will be shorter and shorter, and the amount added will be more and more. The variety of algal exterminator will be changed frequently, and the pollution to the environment will also increase, which will affect our next generation. However, at the same time, the equipment cost of chemical method is high (circulation equipment, dosing device), and the operation cost is high (power consumption, drug cost). Although the effect is obvious, the maintenance time is short, the operation is easy, and it needs special management. Microbial treatment methods (ecological water treatment technology) a wide range of biological species, has a fairly complex physiological characteristics, in aquatic ecology, as the disintegrator of microbes, to the pollutants in the water (including organic matter, some heavy metals, etc.) to decomposition, absorption, become able to available to other living creatures, At the same time it also can reduce or eliminate the toxicity of some toxic substances and residues of aquatic plants can be heated into organic fertilizer, increase soil organic matter, and improved the soil, improve soil granular structure and physical properties, improve the water environment capacity, the increase of capability of self-purification of water body, but also reduced the water loss and soil erosion, inhibits the growth of plant pathogenic bacteria. Therefore, the use of water treatment agents for water treatment is efficient and environmentally friendly. Growth provides favorable conditions for the formation of biochemical effects, and the biochemical effects of microorganisms effectively remove organic and inorganic pollutants, which provides favorable conditions for the next water treatment link.

The company normally supplies photoinitiator TPO, TPO-L, reasonable price, quality are up to export standards. Welcome to negotiate business!